Product Overview
Features
- There are 8 different backlight colors, and it will automatically change every 1 minute, or you can fix only one color you want by pressing the "Settings" button of the gauge.
- Stepper motors, fit for full range of stepping gauges, low power consumption, long lifespan. 9‑32V ultra‑wide long‑term working voltage, and it maximum up to 36V (≤1 minute)).
- IP67 waterproof and dustproof, 316L stainless steel bezel, anti‑corrosion, durable to use, adapted to acid, alkali and humid environments. Anti‑fog curved glass, display the data clearly.
- There is a snap together with the harness connector for the best and secure connection, ensuring that the gauge can work normally even under strong vibrations.
- Applicable to all kinds of vehicle modification, can be used for engine/generator sets, ships, construction machinery, agricultural machinery, automobile modification, etc.
Specifications
- Item Type: Oil Temperature Gauge
- Material: Stainless Steel 316L Bezel + Anti-Fog Glass
- Color: White Dial Silver Bezel
- Functions: Display current Oil Temp
- Operation Mode: Stepper Motor
- Installation Diameter: Approx. 52mm/2in
- Working Volt: 9-32V(12V/24V)
- Signal: 361-19ohm
- Range: 50-150℃
- Operating Temperature: -30℃-+75℃
- Storage Temperature: -40℃-+85℃
- Protection Class: IP67,can work underwater 1m position
- Backlight: 8 Colors: red, green, blue, white, yellow, olivine, orange, purple, totally 8 kinds different backlight color,it will change automatically every 1 minute,or you can fix only one color that you like through press the gauge back ''set'' button
- How to Use: Fix the meter on the instrument panel and connect the power cord
- Wiring:
- The red wire is connected to the positive pole
- The blue wire is connected to the negative pole
- The black wire is connected to the sensor
- The orange wire is connected to backlight
- Installation Notes:
- 1. Cut a hole 52mm in diameter in the panel (your engine room panel and instrument panel) and insert the meter into the hole corresponding to the panel marked with a boss and make a small notch in this position to ensure at least 52mm (2in) instrument panel on the back of the instrument.
- 2. After installing the instrument into the panel, screw down with the fixing ring
- 3. Connect the wires, the instrument shell is directly connected to the 12/24V power supply
- 4. Insert the wire harness and fix it firmly on the table
Package List
1 x Oil Temperature Gauge
1 x Power Wire Harness
1 x Manual
