Product Overview
Features
- Protection Rating: Our fuel level sensor has an IP67 protection rating and an alarm switch rating of 500mA.
- 316 Stainless Steel Material: The fuel tank sending unit is made of heavy duty 316 stainless steel. The craftsmanship is exquisite, the cable is made of PVC and the float is made of NBR.
- Reed Switch: This water level sensor is a reed switch, durable and reliable, with stable output signal. The tank does not need to be adjusted.
- Widely Applied: The fuel level sensor is suitable for boats, cars, trucks, buses and marine areas. Suitable for oil level meter, water level meter and any unadulterated liquid.
- Easy to Install: The fuel level transmitter comes with washer, mounting screws, written and illustrated instructions, and easy to understand wiring instructions.
Specifications
- Item Type: Fuel Level Sensor
- Material:
- Main Unit: 316 stainless steel
- Cable: PVC
- Float: NBR
- Mounting: Standard SAE 5 hole type
- Screw Size: M5 x 0.8
- Hole Diameter: 5mm / 0.20inch
- Product Specification: Approx. 150mm / 6in
- Recommended Tank Size: Approx. 160-178mm / 6.3in-7in
- Resolution Range: Approx: 10mm/0.39in
- Fuel and Water Level Sensor Type: Resistance
- Alarm Switch Rated Current: 500mA
- Protection Level: IP67
- Operating Temperature: -40°F - +185°F (-40°C - +85°C)
- Application: Ship, Yacht, Truck, RV
Package List
1 x Fuel Water Level Sensor
5 x Screw
1 x Washer
Note
The installation will take about 15 minutes total to get your power meter working again. To keep the transmitter from hitting the bottom of the can, the length of the transmitter should be 1in less than the depth of the can if it is a plastic can, or 0.5 less than the depth of the can if it is a plastic can.
