Automobile Smoke Leakage Detector Diagnostic for Intake Exhaust Cooling System Pipeline SDT-202

Features

• Designed for leaks detection of automobile air intake system, fuel system, exhaust system, cooling system and oil pipe.
• Used with the diagnostic instrument, it can accurately determine the fault location and quickly diagnose vehicle engine faults.
• Suitable for all piping systems except EVAP. It has an output pressure of 10‑18psi and an output flow of 10‑20L/min.
• Applicable to all family car, motorcycles, snowmobiles, off‑road vehicles, ATVs, light trucks, speedboats, etc.
• Built-in air pump, does not require an external air source, simple to operate. Equipped with high-accuracy pressure gauge, reliable in use.

Specifications

• Item Type: Smoke Leaks Detector
• Material: Aluminum Alloy + Rubber + PVC + ABS
• Output Pressure: 10-18psi
• Output Flow: 10-20L/min
• Air Source: Built-In Air Pump
• Power Supply: 12V Car Power Supply
• Smoke Oil Capacity: 40ml
• How to Use:
• 1. After assembling the leaks detector accessories, inject 40ML of smoke oil for the first use, and it can be used continuously for 15-20 minutes after one injection;
• 2. Open the engine cover and remove the air filter. Some models need to remove the air flow sensor. 
• 3. Place the universal air inlet adapter on the engine air inlet hose port to block the pipe, and press it firmly until the air inlet hose is sealed.
• 4. Connect the power cord to the car battery. Connect the red pliers to the positive electrode of the battery and the black pliers to the negative electrode of the battery. After the correct connection, the equipment air pump starts to work, otherwise please check the line connection. 
• 5. Press the start/stop button, the smoke generator of the host can start to work; press the start/stop button during the working process, the host will stop immediately.
• 6. When smoke comes out of the smoke pipe, insert the smoke cone of the smoke pipe into the universal air inlet adapter, and the smoke will be introduced into the engine pipeline system.
• 7. According to different models, the inside of the engine will be full of smoke in about 2 minutes. You can use the inspection lights to assist in lighting and start to check the system leaks.
• 8. At the end of the inspection, remove the power cord and put away the accessories for next use;
• 9. Take out the universal adapter and clean the appearance of the adapter and store it properly. The main body of the universal air inlet adapter is made of rubber. Please avoid contact with corrosive liquids such as gasoline.

Package List

• 1 x Smoke Detector Host  

  1 x Clip  

  1 x Smoke Duct 

  1 x Universal Taper Air Inlet Adapter 

  1 x Cone Air Inlet Adapter   

  1 x Measuring Bottle 

  2 x EVPA Test Tool Kit

  1 x Air Suction Valve 

  1 x Hook 

  8 x Plug 

Note