Frequency Converter Variable Drive Motor HY04D023B 4.0KW Medium Low Voltage Equipment

Write a Review
$477.90
Frequency Converter Variable Drive Motor HY04D023B 4.0KW Medium Low Voltage Equipment
Weight (g):
2615.00
Length (cm):
28.00
Height (cm):
23.00
Adding to cart… The item has been added

Product Overview

Features

  • You can just connected L1/L2 to any two of VFD input R/S/T. Used with Mach 3 controller, it can be used as motor rate control.
  • This item use sine roller PWN(SPWM) for the control system.
  • If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.
  • The frequency converter has quick response rate, energy saving and power saving, and simple and convenient wiring.
  • This frequency converter has been tested many times before leaving the factory and its safety is guaranteed.

Specifications

  • Item Type: Frequency Converter
  • Material: ABS
  • Model: HY04D023B
  • Matching Motor Power: 4.0KW
  • Control WaySPWMInput Power220V5-Digit Digital Display and Status Indicator
  • Display frequency, current, rate, voltage, counter, temperature, forward and reverse status, fault, etc.Communication ControlRS-485Operating Temperature-10~40℃Humidity0~95% relative humidity (no condensation)VibrationBelow 0.5GFrequency controlRange0.5~400.00HzAccuracyDigital type: 0.01% (-10-40℃); analog type: 0.1% (25±10℃)Set the resolutionDigital: 0.01Hz; Analog: 1% of the maximum operating frequencyOutput resolution0.01HzKeyboard setting methodCan be set directly with←∧∨Analog setting methodExternal voltage 0-5V, 0-10V, 4-20mA, 0-20mA.Other functionsFrequency lower limit, start frequency, stop frequency, three jump frequencies can be set separatelyGeneral controlAcceleration and deceleration controlAcceleration and deceleration time (0.1-6500 seconds) arbitrary choiceV/F curveV/F curve can be set arbitrarilyTorsion controlThe torsion can be set to increase, the maximum 10.0% start torsion can reach 150% at 1.0HzMulti-function input6 multi-function input terminals, realize 8-stage speed control, program operation, 4-stage acceleration/deceleration switching, UP, DOWN function, counter, external emergency stop and other functionsMulti-function outputThere are 5 multi-function output terminals, which can realize the indication and alarm of running, zero speed, counter, external abnormality, program running, etc.Other functionsAutomatic voltage regulation (AVR), deceleration stop or free stop, DC brake, automatic reset and restart, frequency tracking, PLC program control, traverse control, adjustable carrier, up to 20KHz, etc.Protective functionOverload protectionElectronic relay to protect the motor, driver (constant rotation short 150%/1 minute, fan 120%/1 minute)FUSE protectionFUSE melts new, the motor stopsOvervoltage220V line: DC voltage > 400VUndervoltage220V line: DC voltage < 200VRestart after instantaneous power failureAfter Shun stops, it can be restarted in frequency tracking modeStall preventionStall prevention during acceleration/deceleration operationShort circuit at outputElectronic circuit protectionOther functionsHeat sink overheating protection, reverse rotation limit, function parameter lock for direct start after power-on and fault recovery, etc.

Package List

  • 1 x Frequency Converter

    1 x User Manual

Note

The frequency converter is just suitable for three‑phase asynchronous motors, and does not support external resistance. This function needs to be notified to the seller for customization before purchase. Even if the motor stops running, the fan  runs. If the motor is heavy, please choose a higher horsepower vfd than your motor or contact the seller to select the model. If your motor is 50/60hz, you need to change the for Hertz parameter of the VFD to make it consistent with the motor.