Intelligent Dehumidification Device Semiconductor Refrigeration Dehumidifier 50/60hz

Features

• Corrosion Resistant: Using good quality stainless steel protective shell, safe and reliable, corrosion resistant, sturdy
• Accurate Control: Come with simple operation, intelligent adjustment, wide control range, complete functions, accurate control
• Low Power Consumption: This dehumidifier have simple appearance, low power consumption, low noise communication
• Widely Used in Electrical Equipment: Widely used in electrical equipment such as control cabinets, high and low voltage switch cabinets, ring network cabinets, mechanical control cabinets, etc.
• Good Dehumidification Effect: Using the semiconductor refrigeration and dehumidification method, the water vapor in the air is condensed into water through the semiconductor refrigeration mechanism, and then passes through the duct discharge cabinet, which can achieve a good dehumidification effect

Specifications

• Item Type: Intelligent Dehumidification Device
• Material: Stainless steel
• Input Specifications: 1 Channel temperature and humidity input module
• Working Current: ≥1A
• Working Environment: Temperature: 0-50℃, Humidity: ≤85%RHR
• Measuring Range: Temperature: 0~80℃, Humidity: 0~99%RH
• Output Specifications: 2 Relay outputs, 220VAC/8A 30V/8A
• Resolution: Temperature: 0.1℃, Temperature: 0.1%RH
• Basic Error: Temperature: ±0.5℃, Humidity: ±3%RH
• Total Power: 50W, Cooling Power: 40W
• Dehumidification Capacity: 5m³ Cabinet body
• 24H Water Volume: 300ML under the condition of 30℃/80%RH
• Control Method: Automatic, manual
• Instructions:
• 1. The "Power" indicator light is always on after power on.
• 2. Click the "Mode" button to switch between manual mode and automatic mode, and the corresponding mode indicator lights.
• Manual mode
• "Dehumidification/-" key is the dehumidification control key, click to open or close.
• "Heating/+" button is the heating control button, click to turn on or off.
• The "Ventilation or Function Selection Settings" button is the ventilation control button, click on or off.
• Automatic mode
• The "Dehumidification/-" key is a negative value button.
• The "heat/+" key is a button for adding values.
• The "Ventilation or Function Selection Settings" button is a function selection button.
• (1). Click to enter the dehumidification "-C-" setting interface, and set the humidity level through the plus and minus keys. When the actual humidity is greater than (set value +1), the dehumidification function is turned on, and the dehumidification function is less than (set value -2).
• (2). Click again to enter the heating "-H-" setting interface, and set the temperature through the plus and minus keys. When the actual temperature is less than (set value-2), the heating function is turned on, and when the actual temperature is greater than (set value +1), the heating function is turned off.
• (3). Click again to enter the ventilation "-F-" setting interface, and set the temperature through the plus and minus keys. When the actual temperature is greater than (set value +1), the ventilation function is turned on, and when the actual temperature is less than (set value -2), the ventilation function is turned off.
• (Note: The ventilation and heating function requires additional functional modules, only built in switch relays)

Package List

• 1 x Host 
  1 x Temperature Probe
  1 x Drain Pipe
  1 x Rail
  2 x Screw
  1 x User Manual
  1 x Plug

Note