Isolator Relay Dual Batteries 140A 12V Automotive Protect Control Battery Tool

Features

• This kit provides all the cables, accessories and VSR needed to install the secondary battery with the VSR.
• VSR can fully charge the battery at any time, avoiding the possibility of battery exhaustion and towing at sea.
• Automatically combine two batteries when charging, and isolate two batteries when not charging.
• No voltage drop compared to battery isolation diode (0.6V).
• Dimensions suitable for heavy-duty modular fuse box series (BF43x) and battery switches, in line with mainstream products on the market
• Rugged fiberglass reinforced nylon case. Built-in LED indicator (turn on when VSR starts).
• Remote LED port (not including LED) indicating VSR status
• If the VSR device is installed in a place where it is not easy to see, you can connect an external indicator light and install it in a place where the operator can easily see it, such as the instrument panel. The negative pole of the external light is connected to the black wire to be cut on the VSR device.
• Surface or panel mounting options provide flexibility during installation. 1
• Optional memory mode enables zero power consumption when the engine is turned off. 1
• When you do not need this device (VSR) function, you can cut the red wire to connect an ON-OFF switch to control the power on and off of this device. 1
• Usually used when the boat or yacht is not in use for a long time, turn off the VSR to achieve 0 power consumption

Specifications

• Condition: 100% Brand New
• Item Type: Battery Isolator
• Color: Shown as Picture
• Material: Copper
• Rated Voltage: DC12V
• Combined / Open Circuit Voltage: DC 13.3V / 12.8V
• Continuous Rated Current: 125A
• Intermittent Current Rating: 40A
• Power Consumption: 10mA (standby) 330mA (pull-in) / 0mA (Storage Mode)
• Functional Example:
• After the engine stops, the House battery on the left is discharged to the load device on the upper left. When the battery voltage is lower than 12.8V, the VSR is turned off.
• The startup battery on the right does not discharge to the device
• When the left battery is not charged, the battery will run out.
• There is at least a small battery on the right side that allows you to start the engine

Package List

• 1 x 6 Meters Red Cable Terminated At Both Ends
  1 x 600mm Black Earth Cable
  6 x Cable Tie
  1 x Sensitive Relay 
  1 x Bottom Cover
  2 x Marine Battery Positive Terminal
  1 x Marine Battery Negative Terminal 
  2 x Heat Shrinkable Tube 
  1 x Copper Crimp Terminal (for Red Wire) 
  2 x Copper Crimp Terminal (for Black Wire)
  4 x Mounting Screws 
  1 x Manual