JDS2900-40M 2 Channel DDS Function Signal Generator Pulse Signal Frequency Meter AC100-240VUS Plug

Features

• It has an independent operation interface and a shortcut key made of silicone material, which greatly simplifies the operation steps and feels comfortable.
• The DDS function/arbitrary waveform generator uses DDS direct synthesis technology to produce accurate and low‑distortion output signals.
• It has output short circuit protection, all signal output end can work for 60s under the condition of load short circuit.
• You can use sine wave, square wave, sawtooth wave, or arbitrary wave to generate pulse train, the number of pulse period is continuously adjustable between 0‑1048575.
• Wide application, it is especially suitable for electronic enthusiasts, scientific research colleges and high‑tech enterprises.
• The product integrates functions such as function signal generator, arbitrary waveform generator, pulse signal generator, noise generator, signal measurement, counter and frequency sweep.
• Equal performance dual channel, can output the same or different function signals or arbitrary waveform signals at the same time, 360 degrees continuous adjustable phase difference.
• High accuracy, superior performance, surface mount technology, large‑scale integrated circuit, high reliability and long service life.
• High‑quality flame‑retardant shell, beautiful and generous, after erecting the bracket, it is more convenient to operate and view data.

Specifications

• Condition: 100% Brand New
• Item Type: Signal Generator
• Material: ABS+Silicone
• Color: As shown in the picture
• Model: JDS2900-40M
• Frequency Characteristics:
• Sine Wave Frequency Range: 0-40MHz
• Square Wave Frequency Range: 0-25MHz
• Triangular Wave Frequency Range: 0-25MHz
• Pulse Wave Frequency Range: 0~6MHz
• TTL Digital Wave Frequency Range: 0~6MHz
• Arbitrary Wave Frequency Range: 0~6MHz
• Pulse Width Adjustment Range: 40nS-4000S
• Square Wave Rise Time: ≤10ns
• Minimum Frequency Resolution: 0.01μHz (0.00000001)
• Frequency Accuracy: ±20ppm
• Frequency Stability: ±1ppm/3 hours
• Wave Characteristics:
• Waveform Types: Sine wave, square wave, pulse wave (adjustable duty cycle, pulse width and cycle time can be accurately adjusted), triangular wave, partial sine wave, CMOS wave, DC level (set the DC amplitude by adjusting the offset), half Wave, full wave, positive staircase wave, inverse staircase wave, noise wave, exponential rise, exponential fall, multisonic wave, sinc pulse, Lorenz pulse, and 60 user-defined waveforms.
• Wave Length: 2048 points
• Waveform Sampling Rate: 266MSa/s
• Waveform Vertical Resolution: 14 bits
• Sine Wave:
• Harmonic Suppression: 245dBc (<1 MHz); 240dBc (1 MHz~20MHz)
• Total Harmonic Distortion: <0.8% (20Hz~20kHz, 0dBm)
• Square Wave And Pulse Wave: Overshoot≤5%
• Pulse Wave Duty Cycle Adjustment Range: 0.1%~99.9%
• Partial Sine Wave Duty Cycle Adjustment Range: 0.1%-99.9%
• Sawtooth Wave Linearity: ≥98% (0.01Hz~10kHz)
• Output Characteristics:
• Sine Wave Amplitude Range: Frequency ≤10MHz 2mVpp~20Vpp
• Square Wave/Triangular Wave Amplitude Range: Frequency ≤10MHz 2mVpp-20Vpp
• Amplitude Resolution: 1mV
• Amplitude Stability: ±0.5%/5 hours
• Amplitude Flatness: ±5% (<10MHz); ±10% (>10MHz)
• Wave Output:
• Output Impedance: 50Ω± 10% (typical)
• Protection: All signal output terminals can work within 60 under load short-circuit conditions
• DC Offset:
• Offset Adjustment Range: Offset≤10-amplitude/2
• Offset Resolution: 0.01 V
• Phase Characteristics:
• Phase Adjustment Range: 0~359.9°
• Phase Resolution: 0.1°
• TTL/CMOS Output:
• Low Level: <0.3V
• High Level: 1V~10V
• Level Rise/Fall Time: <20ns
• External Measurement Function:
• Frequency Counter Function:
• Frequency Measurement Range: 1Hz~100MHz
• Measurement Accuracy: Continuous adjustment of gate time 0.01S~10s
• Counter Function:
• Counting Range 0-4294967295
• Coupling Mode: DC and AC coupling modes
• Counting Method: Manual
• Pulse Width Measurement: 0.01us resolution, maximum measurable 20s
• Period Measurement: 0.01us resolution, maximum measurable 20s
• Scanning Function:
• Scanning Channel: CH1 or CH2
• Frequency Scanning Type: Linear scanning, logarithmic scanning
• Scanning Time: 0.1s~999.9s
• Setting Range: Arbitrarily set between the starting point (0.01Hz) and the maximum output frequency of the corresponding model at the end point
• Scanning Direction: Forward, reverse and round trip
• Trigger Function:
• Number of Pulses: 1-1048575
• Trigger Mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)
• General Technical Specifications:
• Display Type: 2.4 inch TFT color LCD display
• Storage and Loading:
• Quantity: 100 groups
• Location: 00 to 99 (the default storage location parameter of 00 is called when the machine is turned on)
• Arbitrary Waveform: Quantity: 60 groups from 1 to 60 (the default is 15 groups at startup)
• Interface:
• Interface Mode: Using USB to serial interface
• Expansion Interface: Serial port with TTL level mode, convenient for users to secondary development
• Communication Rate: Using standard 115200bps
• Communication Protocol: Using commanding line mode, the protocol is open
• Input: AC100-240V (50/60Hz)
• Output: DC5V±0.5V
• Environmental Conditions: Temperature: 0-40 ℃ Humidity: <80%

Package List

• 1 x Signal Generator

  1 x Power Adapter

  1 x USB Cable

  2 x Signal Connection Cable

  1 x English Manual

  1 x CD

  1 x BNC Cable

  
  

Note