Mini Table Saw DIY Model Accuracy Electric Cutting Machine Adjustable Household Tool

Write a Review
$98.24
Mini Table Saw DIY Model Accuracy Electric Cutting Machine Adjustable Household Tool
Weight (g):
3641.00
Length (cm):
30.00
Height (cm):
20.00
Adding to cart… The item has been added

Product Overview

Features

  • Pure copper core motor, possess high-speed and strong power, energy-saving and power-saving
  • 2000-12000r/min, CW and CCW can be adjusted, the governor can realize 7-speed speed regulation
  • The maximum cutting depth is up to 40mm, and supports angular cutting to meet the needs of daily use
  • One machine support many-purpose, can install drill chuck, sandpaper, polishing wheel, rounding device for different operations
  • The product can hold 16/20MM inner hole saw blades, very practical and useful
  • Can be used for manual DIY, wood, metal, plastic, acrylic, etc. cutting, the upper drill chuck and corresponding accessories can be used for grinding, carving, drilling, etc.

Specifications

  • Item Type: Mini Table Saw
  • Material: Aluminum alloy, cold rolled steel, copper
  • Scope of Application: Can be used for manual DIY, wood, metal, plastic, acrylic, etc. cutting, and the upper drill chuck and corresponding accessories can be used for grinding, carving, drilling, etc.
  • Motor Speed: 2000-12000r/min (seven speed regulation)
  • Maximum Cutting Depth: Approx. 40mm / 1.6in
  • Maximum Saw Blade Diameter: Approx. 110mm / 4.3in
  • Suitable for Inner Hole of Saw Blade: Approx. 16mm / 0.6in, 20mm / 0.8in
  • Drill Chuck Shaft Diameter: Approx. 10mm / 0.4in
  • Motor and Spindle Speed Ratio: 1: 3
  • Motor Power: 180W (product use power, not product use idling power)
  • CW and CCW: Adjustable
  • Angle Cutting: Support
  • Table Saw Size(LxWxH): Approx. 280 x 200 x 150mm / 11 x 7.9 x 5.9in(after adding dust-proof board and bracket)
  • Saw Blade Parameters:
  • Size: Approx. 110mm / 4.3in
  • Hole Diameter: Approx. 20mm / 0.8in
  • Uses: For wood

Package List

  • 1 x Table Saw

    1 x Aluminum Alloy Support (including 2 adjusting screws)

    1 x Acrylic Dustproof Board

    2 x Aluminum Alloy Support Screw

    1 x Angle Square

    1 x Hex Wrench

    1 x Brush

    1 x Saw Blade

    1 x Power Adapter

    1 x Plug

    1 x User Manual

Note

1. The power supply must be cut off to install the saw blade
2. The cutting direction and table grinding direction must be operated in accordance with the indicated direction
3. To switch the direction, turn off the power first and then reverse the operation
4. When using a table saw to cut, remove the accessories of the table grinder. When using a table grinder, be sure to remove the saw blade for use.
5.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.