Tyre Pressure Monitoring System IP67 Waterproof with 2 External Sensor USB Charging for Motorcycle

Features

• TPMS can monitor tire pressure / temperature status in real time, which will transmit real-time voice alarm and warning indicator light to remind the driver for driving safety.
• 2 external sensors with IP67 waterproof grade are suitable for being used on rainy days, and they are in high sensitivity and good accuracy for measuring pressure and temperature.
• Supports USB charging, it means that you could use the USB cable (not included) to charge it up while it is in low power, very convenient for you.
• TPMS is widely compatible with those motorcycles with 2 tires. You don't need to worry about the compatibility issue.
• The tire pressure monitoring system is designed to provide you with more protection when driving. It will warn the tire condition in advance.

Specifications

• Item Type: Tyre Pressure Monitoring System
• Material: PC+ Nylon Fiber/Copper Nozzle
• Host Technical Parameters (The Host is Shipped with Built-in Battery)
• Host Built-in Lithium Battery: Capacity 800mAh, 803035
• Working Temperature -20℃-80℃
• Storage Temperature: -30℃-85℃
• Power-on Voltage: DC 5V
• Frequency: 433.92MHz±20.00MHz
• Sensor Parameters (The Sensor is Shipped with Button Batteries)
• Built-in Button Battery: 60mAh Capacity, CR1632
• Working Temperature: -20℃-80℃
• Storage Temperature: -30℃-85℃
• Pressure Range: 0-6.6Bar
• Accurate Pressure: +/-0.1Bar
• Accurate Temperature: +/-3℃
• Transmitting Power: <10dB
• Frequency: 433.92MHz±20.00MHz
• Bracket Installation Instructions:
• 1. Unscrew the 2 screws, put on the motorcycle/electric bike/bicycle and tighten;
• 2. Place the mounting head of the bracket toward the position you need, and confirm that the bracket is firm;
• 3. Install the tire pressure receiver on the bracket, tighten and then lock;
• 4. Through ball head rotation tuning knob, the joint position is adjusted appropriately to the appropriate angle
• How to Use: Two buttons pavw (switch) set (set)
• 1.pavw: Long press for more than three seconds to shut down
• After shutting down, press and hold for more than three seconds to turn on
• 2. Set: Long press for three seconds to enter the menu setting, after entering the menu setting, short press the set key to set the menu selection
• Respectively: 
• A. Tire pressure unit Bar/Psi
• B. Tire temperature unit ℃
• C. Tire pressure high pressure value setting 2.0-5bar
• D. Tire pressure low pressure value set 0.5-3bar
• E. Temperature and high temperature alarm setting 50-90℃
• 3. Long press Set for six seconds to enter the tire learning pairing
• Front wheel flashing means front wheel learning, after learning, it will automatically jump into the rear wheel
• The flashing of the rear wheel means the rear wheel is learning, and it will automatically exit after learning

Package List

• 1 x TPMS
  2 x Sensor
  1 x Manual 
  1 x Wrench
  2 x Nut
  1 x USB Cable
  1 x Bracket

Note