Product Overview
Features
- Reliable in Working: Using excellent mainboard and full patch design, this variable frequency drive enables good protection and stable working.
- Simple in Operation: Equipped with digital display and keyboard, the motor VFD is very convenient in operation, higher in working efficiency.
- Built in Cooler Fan: The built in cooling with large fan blade ensures quick heat dissipation, which also has low noise, very reliable in use.
- Smart for Extension: Comes with RS485 communication function and built in brake unit that can connect to brake resistor for emergency stopping.
- Flame Retardant ABS: The industrial grade ABS material is flame retardant, and very sturdy with heat and impact, very durable for long using.
Specifications
- Item Type: Variable Frequency Drive
- Material: ABS
- Storage Temperature: -25℃ ~ +55℃
- Output Current: 15A
- Applicable Braking Resistance Power: 1000W
- Applicable Braking Resistance: 75Ω
Package List
- 1 x Variable Frequency Drive
1 x User Manual
Note
1. Before wiring, please confirm whether the input power supply is off.
2. The wiring operation shall be carried out by professional electrical engineering personnel.
3. The grounding terminal must be grounded.
4. After the emergency stop circuit wiring is completed, be sure to check whether the action is effective.
5. The output line of the frequency converter must not be connected with the housing, and the output line must not be short circuited.
6. Please confirm whether the voltage of AC main circuit power supply is consistent with the rated voltage of frequency converter.
7. Do not carry out voltage withstand test on the frequency converter.
8. Please connect the braking resistor according to the wiring diagram.
9. Do not connect the power cord to the output U, V, W terminals.
10. Do not connect the contactor to the output circuit.
11. Be sure to install the protective cover before powering on. When removing the cover, be sure to disconnect the power supply.
12. Select the frequency converter with reset and retry function, and keep away from mechanical equipment. Because the alarm will suddenly restart when it stops.
13. The alarm can be reset only after confirming that the operation signal is cut off. When the alarm is reset under the operation signal state, the converter may start suddenly.
14. Do not touch the terminals of the converter. There is high voltage on the terminals, which is very dangerous.
15. Do not change wiring and terminal disassembly when power is on.
16. Cut off the power supply of the main circuit before inspection and maintenance.
17. Do not modify the frequency converter without authorization.
