Product Overview
Features
- Vibration meter is composed of acceleration transducer and digital measurement display circuit.
- It is used to measure vibration displacement ,RMS of vibration velocity and acceleration of rotating machinery.
- Its measured value can be latched, when the voltage is low, the screen will reminder.
- In a minute if there is no measurement, it will automatically shut down.
- It has wide measuring range, easy to operate and carry.
Specifications
- Features:
- 1. Vibration meter is composed of acceleration transducer and digital measurement display circuit.
- 2. It is used to measure vibration displacement ,RMS of vibration velocity and acceleration of rotating machinery.
- 3. Its measured value can be latched, when the voltage is low, the screen will reminder.
- 4. In a minute if there is no measurement, it will automatically shut down.
- 5. It has wide measuring range, easy to operate and carry.
- Specification:
- Condition: 100% Brand New
- Model: YITENSEN63B
- Measurement Range: acceleration : 0.1-199.9m/s² velocity:0.1-199.9mm/s (RMS) displacement amplitude:1 -1999um
- Frequency Response: acceleration : 10Hz-1000Hz , ≤±10%
- Velocity: 10Hz-500Hz, ≤±10%
- Displacement amplitude:10Hz-200Hz, ≤±10%
- Linearity and Accuracy
- Displacement: 0-20um, ≤±10% >20um, ≤±5%
- Velocity: 0-2.0mm/s, ≤±10% >2.0mm/s, ≤±5%
- Acceleration : 0-2.0m/s², ≤±10% >2.0m/s², ≤±5%
- Display : Three semi-digital liquid crystal display
- Power supply:laminated battery(not included) (9V),one piece
- Low voltage indication: When the battery voltage drops below 5.5V, the screen will prompt low voltage, then replace the battery with new one. In a minute if there is no measurement, it will automatically shut down.
- Environmental: Environment temperature : 0-40 ℃ relative humidity: ≤80%
- Atmospheric Pressure : 75 -106kpa
- Size: Approx. 185 * 68 * 30mm / 7.3 * 2.7 * 1.2in
- Package List:
- 1 * Main Machine
- 1 * User Manual
- Operation:
- 1. Loading battery Open the battery compartment Lid, load a 6F22 battery in the battery compartment with correct polarity ,close the Lid.
- 2. Checking Battery Voltage Press the button and observe the display. If a battery mark appears on the display(left side),replace the battery with new one. If no such mark appears, the meter is ready for measuring.
- 3. Setting Measurement Mode Select the acceleration, velocity or displacement measurement mode with the mode selector. The selected mode is indicated by the symbol on the right of the display.
- 4. Measurement Magnet to the object's Vibration vertical cross-section. Link of the sensor insert the input socket of the sensor, Press the button(power on) and keep the button depressed, the vibration value is now indicated on the display. By releasing the button, vibration value at that moment is freezing on the display .Now you can detach the probe from the object and read the displayed value.
- 5. Press button again to reset the hold function and repeat measurement.
- Note:
- 1. It can not in a strong magnetic field, corrosive gas and massive attack environment .
- 2. Instrument and the sensor is the whole structure, can not close down and not making arbitrary adjustment on the internal potential.
- 3. When displayed cell to replace the mark, replace the battery.
- 4. When the instrument are used for a long time , please take out the battery, and avoid corruption.
